Main Index   Search   Register   Login   Who's Online   FAQ   Links
  2 Online, 0 Active   You are not logged in  
Main Index     The HIVE light edition (TM)
This is a historical archive
The forum is read-only. Private information has been removed. It is not possible to login.


Methods Discourse  

All 4 posts   Subject: PTC Synthesis of Methadone   Please login to post   Down

 
    Aurelius
(Active Asperger Archivist)
01-10-04 19:37
No 481630
      PTC Synthesis of Methadone
(Rated as: excellent)
    

Dibenzo-18-crown-6 as PTC in Bockmuhl’s synthesis of Methadone
Jacques H. Poupaert*, Patrick van der Jeugo, Bruno M. Gerardy, M. Claesen, and P. Dumont
J. Chem. Res. (M), 2482-92 (1981)
Dept. of Med. Chem.
School of Pharm.
Av. E. Mounier 73, (B?) 8-1200  Bruzelles (Belgium)

Methadone (1)1 was first synthesized as the racemic modification by Bockmuhl and Erhardt2 according to the approach outlined in Scheme 1.  Treatment of diphenylacetonitrile anion (2) (as the lithium, sodium or potassium salt) with either 1-dimethylamino-2-chloropropane (3) or 2-dimethylamino-1-chloropropane (4) produced a mixture of isomeric nitriles 5 and 6.  This reaction is extensively documented in the literature2-19[.  The aziridinium ion intermediate (7) has been proposed to account for the production of rearranged products (5 and 6) and for the stereochemical course17 in the key alkylation step.  Reaction of 5 with ethyl magnesium bromide followed by acid hydrolysis afforded methadone (1) in high yield.

Under Bockmuhl’s original conditions (sodamide in benzene as base)2, the alkylation proceeds without selectivity and a nearly 50:50 ratio20 of nitriles 5 and 6 is observed.  In fact, nucleophilic attack of 2 on the less hindered carbon of 7 is expected to occur with a lower activation energy than attack on the methyl-substituted carbon.

Accordingly, in an effort to produce 5 in higher proportions, modified reaction conditions were explored aiming principally at varying solvents, bases and reaction temperatures.

The results are given in table 1.  There appears to be a significant correlation between lower reaction temperatures and higher proportions of 5 over 6.  However, when the reaction was run at RT even for a long period of time, (2.5-4.0 days), a low conversion of diphenylacetonitrile was encountered (12-15%).  To circumvent this drawback (by enhancing the reactivity21,22 of 2, dibenzo-18-crown-6   (8) was used under both liquid-liquid and liquid-solid phase PT conditions.

It is a well-established fact that crown ethers form stable complexes with metal cations23, and by increasing the dissociation of ion pairs they provide highly reactive, unsolvated (so-called “naked”) anion species24.  However, in homogeneous conditions, their practical importance is limited, as they must be employed in equimolar amounts.  On the contrary, in two-phase organic aqueous systems, crown ethers of suitable structure (dibenzo-18-crown-6 (8) or dicyclohexyl-18-crown-6 ) are effective in catalytic amounts and act as PTC’s.  Best results in the production of 5 were obtained under liquid-liquid two-phase conditions in the presence of 8.

Optimization of reaction conditions led to a striking 72:28 ratio of 5 to 6 ensuring an 86% overall yield of (5+6) and ????? of recrystallized 526.  This compares most favorably with the various homogeneous systems presented in table 1 (exps. 3-7, 10), and particularly with the 26% of isolated 626 in Bockmuhl’s original work2,20.

Solid-liquid two-phase systems in conjunction with crown ethers offer a valuable alternative to liquid-liquid two-phase conditions.  Crown ethers and sodium or potassium carbonate have been used successfully to effect alkylation of carbanions from various substrates, including nitriles possessing acidic C-H bonds29.



Exp. N Solvent Temp. Base Relative Proportion Rel. Prop. Yield -
- - (*C) - % % % -
- - Time (hr) - 5 6 (5+6) Isolated 5e
1 Xylenea,b 135/2.5 KOH 58 42 98 38
2 Xylenea,b 135/2.5 K2CO3 58 42 10 -
3 Toluenec 110/2.5 NaH 54 46 45 13
4 Dioxanec 100/2.5 NaH 60 40 83 32
5 Benzene2,17 80/2.5 NaNH2 48 52 83 26
6 THFc 65/2.5 NaH 65 35 83 36
7 THF/t-BuOHc 65/2.5 t-BuONa 63 37 85 36
8 DMSO/H2Oa,d 45/2.0 NaOH 72 28 85 44
9 DMSO/H2Oa,d 20/48 NaOH 75 25 65 34
10 THFc 20/96 NaH 70 30 15 -
11 DMSO/H2Of,d 45/1.0 NaOH 69 31 75 39


a   These experiments were performed in the presence of 8.
b   These experiments were conducted as in c. (experimental)
c   These experiments were run as in a. (experimental)
d   Experimental conditions can be found in b. (experimental)
e   This refers to material recrystallized from n-heptane, except for exp. ?? 5 (cf. ref. 26)    Yields are calculated on the basis of diphenylacetonitrile.
f    This experiment was performed in the presence of benzyltriethylammonium chloride (5g) instead of 8.



Nevertheless, this solid-solid system suffers two main disadvantages: high temperatures (120-150*C) and low yields (35-45%).  In the present case, the required high temperatures were expected to produce low selectivity and this was indeed the case (see table 1, exp. 2).  More effective conditions were found when solid KOH was used.  (exp 1).

Our results (exps. 1 and 2) parallel the data recently reported by Dou et al concerning the use of solid K2CO3 and solid NaOH in the Williamson ether synthesis: the superiority of solid NaOH over K2CO3 was clearly demonstrated30.

Two-phase liquid-liquid systems, such as the one described here, offer numerous advantages over homogeneous reaction conditions using NaH, NaNH2, or t-BuOK  : hazardous and expensive reagents, anhydrous solvents, nitrogen atmosphere… are rendered unnecessary and the actual procedure can be of practical interest in the preparation of radio-labeled methadone or stable-isotope analogues of methadone, as this modification of Bockmuhl’s synthesis makes the best use of costly precursors.

Experimental:

(R,S)-2,2-Diphenyl-4-dimethylaminopentanenitrile (5)

a.   Homogeneous Conditions

Into a dry, three-necked flask (500ml) fitted with dry N2 inlet, septum and reflux condensor equipped with a CaCl2 tube were placed 150ml of dry THF and 10.5g of a 50% suspension of NaH (0.22mol) in mineral oil.  A solution of 42.5g of diphenylacetonitrile (0.22mol) in 100ml of dry THF was added dropwise over 1 hr after which time a deep red color had developed.  A solution of 30.4g of 3 (0.25mol) in 60ml of dry xylene was then added in one portion.  The resulting reaction mixture was stirred and refluxed for 2.5hr.  After cooling to RT, the suspension was poured into 1L of ice-water and extracted three times with Et2O.  The dried (MgSO4) extracts were evaporated under-reduced pressure to remove most of the THF and then taken up in Et2O.  The product was extracted into 10% aq. HCl; the aqueous extract was back-washed with Et2O and made basic with 10% NaOH.  The resulting oil was taken up in Et2O and dried over MgSO4.  The solvent was removed in vacuo to give an oily residue (51.6g, 83% yield) consisting essentially of a mixture of 5 and 6.  This oil was chilled and triturated in cold n-hexane (400ml) to produce a white product, that was collected by filtration and recrystallized from n-heptane (400ml) to yield after storage in the refrigerator 22g of 5 (36% yield) that had; MP: 90-91*C.  1HNMR, IR and MS were consistent with the proposed structure.  This compound was pure by GLC and HPLC.

b.   Liquid-Liquid Two-phase Conditions

To a solution of 60g of diphenylacetonitrile (0.31mol) and 2g of 8 (5.5mmol) in 50ml of DMSO was added under efficient mechanical stirring a solution of 50g of NaOH (1.25mol) in 50ml of distilled water; 60g of the HCl salt of 3 (0.38mol) was then added in small portions over 1 hr.  This resulted in a stepwise increase of the temperature up to 45*C.  The two-phase system was stirred during and additional hour while the temperature was kept at 45-50*C with a water bath.  The work-up procedure was performed essentially in the same way as in “a” to give 74.2g of the mixture of 5 and 6 (86% overall yield).  Trituration in n-hexane, filtration and recrystallization from n-heptane yielded 38g of 5 (44% yield). MP: 90-91*C.  This compound was pure by HPLC and GLC.

c.   Solid-Liquid Two-phase Conditions

To a solution of 10g of diphenylacetonitrile (51.7mmol) in 50ml of dry xylene were added 1g of 8 (2.75mmol) and 15g of solid KOH in granules (0.263 mol).  The mix was heated to reflux and a solution of 10g of 3 (82.3mmol) in 25ml of dry xylene was added portionwise over 15min.  After refluxing for 2.5hr, the supernatant reddish liquid was decanted from the solid residue and filtered.  The usual work-up afforded 5.5g (38% yield) of recrystallized 5; MP: 90-91*C.

GLC Conditions of analysis of 5 and 6.

Glass column 3% OV 17 (length 2m, int. diam. 3mm) Flow rate 30ml/min.  Oven temp. program; start 140*C, 8*/min increase to 200*C.  Compound 6 had Rt 11.1min; compound 5 had Rt 12.8 min.

HPLC Conditions of analysis of 5 and 6.

Partisil 10 PAC, length 30cm, int. diam. 4.6mm, flow rate 1.3mol/min solvent: n-hexane, methanol, n-butanol, 60:20:20 (v/v).  Compound 6 had K’ 2.27 and compound 5 had k’ 3.51.  Ethanol was considered as the unretained compound.

References and Notes:

1.    Methadone (1) is a potent sythetic narcotic drug with analgesic and other effects similar to morphine: it is commonly used to ease withdrawl symptoms in cases of physical dependence upon other narcotics (drug addiction).  L.S. Goodman and A. Gilman, “The Pharmacological Basis of Therapeutics”, MacMillan, New York, N.Y., (1970), p 262.

2. M. Bockmuhl and G. Ehrhardt, J. Liebigs Annal. Chem., (1949), 561, 52.

3.E.M. Schultz, C.M. Robb and J.M. Sprague, JACS, (1947), 69, 188.

4.W.R. Brode and M.W. Hill, JACS, (1947), 69, 721

5.N.R. Easton, J.M. Gardener, and J.R. Stevens, JACS, (1947), 69. 976.

6.E.M. Schultz, C.M. Robb, and J.M. Sprague, JACS, (1947), 69, 2154.

7.E.M. Schultz, and J.M. Sprague, JACS, (1948), 70, 48.

8.N.R. Easton, J.H. Gardener, and J.R. Stevens, JACS, (1947), 69, 2941.

9.N.R. Easton, J.H. Gardener, M.L. Evanick, and J.R. Stevens, JACS, (1948), 70, 76.

10.L.C. Cheney, R.R. Smith and S.B. Binkley, JACS, (1949), 71, 53.

11.E.Walton, P. Ofner, and R.H. Thorp, J. Chem. Soc., (1949), 648.

12.J.H. Cusic, JACS, 71, 3546, (1949).

13.J. Attenburrow, J. Elks, B.A. Hems and K.N. Speyer, J. Chem. Soc., (1949), 510.

14.M.E. Speeter, L.C. Cheney, and S.B. Binkley, JACS, (1950), 72, 1659.

15.M. Sletzinger, E.M. Chamberlin and M. Fishler, JACS, (1952), 74, 5619.

16.H. Rushig and K. Schmitt, Chem. Ber., (1955), 88, 875.

17.C.H. Barnett and J.C. Smirz, JOC, (1976), 41, 710.

18.J.G. Henkel, E.P. Berg, and P.S. Portoghese, J. Med. Chem., (1976), 19, 1308.

19.D.L. Hachey, M.J. Kreek, and O.H. Mattson, J. Pharm. Sci., (1977), 66, 1579.

20.On the basis of ref. 17. a 48 : 52 ratio of 5 to 6 could be calculated for the original conditions of Bockmuhl (cf ref 1).  Other authors reached the same conclusion (cf refs. B. 13 and 16).

21.D.J. Sam and H.E. Simmons, JACS, (1974), 96, 2252.

22.M. Makosza and M. Ludvikow, J. Angew. Chem., (1974), 744.

23.C.J. Pedersen and H. K. Frensdorff, Agnew. Chem. Internat. Edit., (1972), 11, 16.

24.H.D. Durst, Tet. Lett., (1974), 2421.

25.D. Landini, F. Montanari and F.M. Pirisi, J. Chem. Soc. Chem. Commun., (1974), 879 and refs cited therein.

26.It is noticeable that in Bockmuhl’s procedure (ref 1), which was taken over by many authors, simple trituration with petroleum leads to the isolation of 5 contaminated by 6 (up to 5% of 6).  Recrystallization from n-heptane produces pure 5.

27.M. Matosza and B. Serafinowa, Rocz. Chem., (1965), 39, 1799.

28.The use of quaternary ammonium halides as PTC has been reviewed.
W.P. Weber and G.W. Gokel, “Phase Transfer Catalysis in Organic Synthesis” Springer Verlag, Berlin Heidelburg New York (1977), 136-205.

29.M. Fedorynki, K. Mojciechowski, Z. Matacz, M. Matosza, JOC, (1978), 43, 4682.

30.M. J.M. Dou, B, Delfort, P. Hassahaly, R. Gallo, and J. Kister, Bull. Soc. Chim. Belg., (1980), 89, 421.

Act quickly or not at all.
 
 
 
 
    Rhodium
(Chief Bee)
01-12-04 00:45
No 481915
User Picture 
      Metadone Nitrile: Other PTC Preparations     

Great Aurelius! As a cross-reference, I'd like to add that other PTC preparations of Methadone Nitrile can be found here:

Post 432796 (murmur: "PTC alkylation of diphenylacetonitrile", Methods Discourse)
Post 437755 (murmur: "Deuterated Methadone", Novel Discourse)

The Hive - Clandestine Chemists Without Borders
 
 
 
 
    Rhodium
(Chief Bee)
01-20-04 03:38
No 483448
User Picture 
      Bockmühl's Original Methadone Synthesis
(Rated as: excellent)
    

Ueber eine neue Klasse von spasmolytisch und analgetisch wirkenden Verbindungen
Max Bockmühl & Gustav Ehrhart
Ann. Chem. 561, 52-85 (1949) (https://www.rhodium.ws/pdf/bockmuhl-erhardt.pdf)

[About a novel class of compounds having spasmolytic and analgetic effects]

The original german article describing the invention of Methadone and a huge number of analogs, all with preparative, analytical and pharmacological details given in the experimental section. A truly classic article in the field of opioid chemistry.

The Hive - Clandestine Chemists Without Borders
 
 
 
 
    Rhodium
(Chief Bee)
03-02-04 23:52
No 492495
User Picture 
      Synthesis of Amidone (Methadone) and Analogs
(Rated as: excellent)
    

Analgesics. Part I.
Esters and Ketones derived from -Amino--cyano-,-diarylalkanes

By D. J. Dupré. J. Elks. B. A. Hems. (Miss) K. N. Speyer and (in part) R. M. Evans
J. Chem. Soc. 500-510 (1949) (https://www.rhodium.ws/pdf/amidone.analgesics-1.pdf)

Abstract
A number of basic cyanides (V) have been prepared either (a) by reaction of a diarylmethyl cyanide with a chloro-amine R2N[CH2]nCl, or (b) by treatment of a diarylmethyl cyanide with an ,-dihalogeno-paraffin, and reaction of the resulting halogeno-cyanide with a secondary amine. The amino-cyanides were converted into amino-ketones by treatment with Grignard reagents. and into amino-esters by direct esterification with alcoholic sulphuric acid.
The acids R2NCH2CH2CPh2CO2H (R = Me or Et) on treatment with thionyl chloride gave the 3,3-diphenyl-1-alkylpyrrolid-2-one; the homologous acid.  Et2NCH2CH2CH2CPh2CO2H, on similar treatment, gave an acid chloride which showed no tendency to cyclise.
The analgesic activities of the amino-esters and amino-ketones are given.
____ ___ __ _

Analgesics. Part II.
The Synthesis of Amidone and Some of its Analogues

By J. Attenburrow. J. Elks. B. A. Hems. and (Miss) K. N. Speyer
J. Chem. Soc. 510-518 (1949) (https://www.rhodium.ws/pdf/amidone.analgesics-2.pdf)

Abstract
Treatment of 1-chloro-2-dimethylaminopropane with diphenylmethyl cyanide in the presence of sodamide gave a mixture of compounds. from which 3-dimethylamino-1,1-diphenylbutyl cyanide (II) was isolated in 36% overall yield. Amidone (III) was obtained from (II) by treatment with ethylmagnesium iodide. Both 1-chloro-2-morpholinopropane and 2-chloro-1-morpholinopropane, on reaction with diphenylmethyl cyanide. gave a mixture of 1,1-diphenyl-3-morpholinobutyl cyanide (VIII) and 1,1-diphenyl-3-morpholinoisobutyl cyanide (XI), both of which have been converted into the corresponding ethyl ketones.
Treatment of diphenylmethyl cyanide with ethylene oxide or propylene oxide gave lactones instead of the hydroxy-cyanides required. Attempts to prepare the cyanide (VIII) by addition of hydrogen bromide or hydrogen iodide to 1,1-diphenylbut-3-enyl cyanide (XII) and reaction of the product with morpholine gave the required compound. but only in poor yield. Attempts to reduce selectively the double bond of 3-bromo-1,1-diphenylbut-3-enyl cyanide (XXI) were unsuccessful.

The Hive - Clandestine Chemists Without Borders
 
 

All 4 posts   End of thread   Top
   

 https://the-hive.archive.erowid.org    the-hive@erowid.org
   
Powered by Cognitive Dissonance v4.15 Platinum Ed., (C) 2022, Weapons of Mass Instruction Systems Unlimited Asia. Protected by international patents.

Links     Erowid     Rhodium

PIHKAL     TIHKAL     Total Synthesis II

Date: 11-26-24, Release: 1.6 (10-04-15), Links: static, unique